12Mp Poe Camera Fisheye Ai Ip12M F2380Ew
OpticLink Camera Technical Specifications and Manuals
Stream Performance
Connection Strings
Documentation
OpticLink Index
This technical specification sheet was generated by the OpticLink resources & technical index. We specialize in aggregating high-fidelity camera data for professional integration.
Technical Specifications
Raw Datasheet ExtractIP12M-F2380EW Amcrest 12MP AI Fisheye Network IP Camera Technical Specifications Model IP12M-F2380EW Camera Image Sensor 1/1.7” CMOS Max. Resolution 4000 (H) x 3000 (V) ROM 2GB RAM 4GB Scanning System Progressive Electronic Shutter Speed Auto/Manual 1/3s-1/100,000s 0.01 [email protected] (Color, 30 IRE) Minimum Illumination 0.001 [email protected] (B/W, 30 IRE) 0 Lux (Illuminator on) S/N Ratio >56dB IR Distance 32.81ft (10m) IR On/Off Control Auto/Manual IR LEDs 3 (IR LEDs) Lens Lens Type Fixed-focal Lens Mount M12 Focal Length 1.85mm Max. Aperture F2.0 Field of View H: 185°, V: 180° Iris Control Fixed Close Focus Distance 1.31ft (0.4m) Lens Detect Observe Recognize Identify 1.85mm 131.23ft (40m) 52.49 (16m) 26.2ft (8m) 13.1ft (4m) DORI Distance Note: The DORI distance calculated based on sensor specification and lab test result 62676-4 which defines the criteria for Detect, Observe, Recognize, and Identify. AI People Counting People Counting, Queuing Heat Map Supported IVS Intrusion, Tripwire Reports Supported Video Compression H.265/H.264 Main stream: 4000 × 3000@(1–25/25 fps) sub stream: 704 × 576@(1–25/30 fps) third stream: 1280 × 960@(1–17/17 fps) Fisheye mode: 1O (4000 × 3000), 1P (4096 × 1024), 2P (2432 × 2432) 1R (1216 × 1216), 2R (2432 × 2432), 4R (2432 × 2432), 1O + 3R (2432 × 2432) Frame Rate *The values above are the max. frame rates of each stream; for multiple streams, the values will be subjected to the total encoding capacity. Stream Capability 3 Streams 4000 × 3000; 3280 × 2480; 2880 × 2160; (3M) 2048 × 1536; 1.3M Resolution (1280 × 960); D1 (704 × 576/704 × 480); CIF (352 × 288/352 × 240) Bit Rate Control CBR/VBR H264: 8 kbps–16384 kbps Bit Rate H265: 3 kbps–16384 kbps Day/Night Auto(ICR)/Color/B/W BLC Supported HLC Supported WDR DWDR White Balance Auto; natural; street lamp; outdoor; manual; regional custom Gain Control Auto Noise Reduction 3D NR Motion Detection OFF/ON (4 areas, rectangular) Defog Supported Privacy Masking 4 Areas Audio Built-in Mic Supported Audio Compression PCM; G.711Mu; G.726; G.723 Port Audio Input 1 Channel (RCA Port) Audio Output 1 Channel (RCA Port) Alarm Input 2 Channels In: 5mA 3V-5V DC Alarm Output 2 Channels Out: 1,000mA 30V DC/500mA 50V DC Network Network Port RJ-45 (10/100/1000 Base-T) SDK and API Supported IPv4; IPv6; HTTP; TCP; UDP; RTSP; RTMP; SMTP; FTP; SFTP; DHCP; DNS; Network Protocol DDNS; UPnP; NTP; Multicast; NFS; PPPoE User/Host 20 Storage FTP; SFTP; MicroSD Card (Up to 256GB), NAS Amcrest Surveillance Pro, Amcrest View Pro (iOS/Android), Amcrest Management Software Cloud, Amcrest Blue Iris, most mainstream web browsers including Google Chrome, Mozilla Firefox, Microsoft Edge, Safari, etc. General Power Supply 12V DC/PoE+ Basic: 6.5 W (12V DC); 6.1 W (PoE) Power Consumption Max. (ICR + IR intensity): 13 W (12V DC); 13.9 W (PoE) Heating: 3 W (12V DC); 3 W (PoE) Operating Temperature –40 °F to +140 °F (-40°C to 60°C) Operating Humidity ≤95% Storage Temperature –22 °F to +158 °F (–30 °C to +70 °C) Protection IP67; IK10 Casing Metal Dimensions 2.35" × Φ5.90" (59.8 mm × Φ149.8 mm) Weight 1.74lbs. (0.79kg) Junction Mount: PFA132-E Mount Types Ceiling Mount: PFA100+PFB300C Wall Mount: PFA100+PFB302S Dimensions |
Surveillance Deployment & Architectural Overview
The Amcrest 12Mp Poe Camera Fisheye Ai Ip12M F2380Ew represents a dedicated node within modern security frameworks. Specialized for Panoramic deployment, this camera integrates a high-definition video sensor imaging engine designed to capture high-density video data under variable lighting profiles. Equipped with a Standard surveillance optics configuration, the physical optical assembly yields optimized depth of field calculations suited for both residential perimeter surveillance and strategic commercial placements.
Streaming parameters are architected around high-efficiency codecs. The main stream operates up to a maximum framerate of 25 FPS, supplying dense frame arrays for primary analytical recording. The sub-stream runs at 30 FPS to deliver highly responsive live viewing across network clients without triggering performance bottlenecks. High-fidelity audio capabilities are Check manufacturer manual for hardware options, enabling synchronous monitoring of surrounding acoustic environments.
OpticLink Pro Deployment & Smart Home Integration
OpticLink Pro Connection
OpticLink Pro is the native, premium Windows multi-camera management application designed for seamless connection to the Amcrest 12Mp Poe Camera Fisheye Ai Ip12M F2380Ew. It leverages low-overhead hardware acceleration and memory-efficient streaming routines to handle high-resolution inputs without CPU bottlenecking. Simply copy the generated connection string below directly into the OpticLink Pro interface to establish instant, privacy-first surveillance feeds and synchronous recording.
Home Automation & Advanced Streaming
Maximize the full potential of your Amcrest 12Mp Poe Camera Fisheye Ai Ip12M F2380Ew hardware. OpticLink Pro natively integrates with the camera's high-fidelity audio streams and provides advanced RTSP controls. Additionally, this connection is fully compatible with home automation servers such as Home Assistant, enabling you to build responsive live-view dashboard blocks, trigger smart sensory scenes, and control smart remote modules like QuickRemote for Roku.
Hardware Diagnostics & LED Troubleshooting Status
Refer to the following structured troubleshooting framework to resolve connection dropouts, network handshake errors, or boot failures on the Amcrest hardware.
| LED Status Code | Operational Phase | Diagnostic / Resolving Action |
|---|---|---|
| Solid Red / Solid Amber | Booting / System Initialization | Hardware powering up. If this status persists for more than 180 seconds, verify stable current output on your PoE switch or local DC adapter. Perform physical power cycle or hard reset. |
| Flashing Amber / Orange | No Network / IP Address Pending | Network cable detected but DHCP handshake failed. Confirm physical connection to active switchport. Inspect DHCP server logs for MAC address registration anomalies. |
| Flashing Blue / Green | Wi-Fi Connecting / Local Handshake | Camera attempting local network authentication. Ensure the target SSID broadcast is active on the 2.4GHz band (or 5GHz where supported) and WPA/WPA2 password parameters are correct. |
| Solid Blue / Solid Green | Normal Active Operation | Authentication verified, active IP address leased, RTSP listener ready. Safe to initiate integration strings. |
Written by Christopher Istvan
Developer of OpticLink ProChristopher Istvan is a security technology writer and the Developer of OpticLink Pro. Specializing in high-fidelity RTSP video routing, surveillance networking protocols, and smart home automation architectures, Christopher compiles granular, clinical documentation directly from physical hardware teardowns and manufacturers' low-level datasheets.
Data Integrity & Liability
Disclaimer: The content on this page has been sourced from the manufacturers directly via automated crawling and technical datasheet parsing. While OpticLink strives for absolute accuracy, we are not liable for any faults, inaccuracies, or changes in technical specifications, firmware capabilities, or connection string data obtained from other publicly accessible or community-based sources. Always verify critical performance requirements with the manufacturer's official documentation prior to deployment.