Stream Performance
Connection Strings
rtsp:///cam/realmonitor?channel=1&subtype=00&authbasic=[AUTH]
rtsp:///
Documentation
OpticLink Index
This technical specification sheet was generated by the OpticLink resources & technical index. We specialize in aggregating high-fidelity camera data for professional integration.
Technical Specifications
| Protocol | Protocol |
Raw Datasheet ExtractIP8M-VB2696EW-AI Amcrest 8MP IR Vari-focal AI PoE Bullet Camera Technical Specifications Model IP8M-VB2696EW-AI Camera Image Sensor 1/2.7” CMOS Max. Resolution 3840 (H) x 2160 (V) ROM 128 MB RAM 256 MB Scanning System Progressive Electronic Shutter Speed Auto/Manual 1/3 s–1/100,000s 0.005 [email protected] (Color, 30 IRE) Minimum Illumination 0.0005 [email protected](B/W, 30 IRE) 0 lux (Illuminator on) S/N Ratio >56dB IR Distance 196.85ft IR On/Off Control Auto/Manual LEDs 4 IR LEDs Rotation Range Pan: 0°-360°, Tilt: 0°-90°, Rotation: 0°-360° (Manual) Lens Lens Type Motorized vari-focal Mount Type Φ14 Focal Length 2.7mm – 13.5mm Max. Aperture F1.5 Optical Zoom 5x Angle of View H: 113°–31°; V: 58°–18°; D: 138°–36° Iris Type Fixed Close Focus Distance 2.62ft Lens Detect Observe Recognize Identify W 279.86ft 111.88ft 56.10ft 27.89ft T 918.64ft 367.45ft 183.73ft 97.86ft Dori Distance Note: The DORI distance calculated based on sensor specification and lab test result 62676-4 which defines the criteria for Detect, Observe, Recognize, and Identify. Video Video Compression H.265, H.264 Main stream: 3840 × 2160@(1–20 fps)/2688 × 1520@(1–25/30 fps) Video Frame Rate sub stream: 704 × 576@(1–25 fps)/704 × 480@(1–30 fps) Stream Capability 2 Streams 3840 × 2160 (3840 × 2160); 3072 × 2048 (3072 × 2048); 3072 × 1728 (3072 × 1728); 2880 × 1620 (2880 × 1620); 2688 × 1520 (2688 × Resolution 1520); 3M (2048 × 1536); 2304 × 1296 (2304 × 1296); 1080p (1920 × 1080); 1.3M (1280 × 960); 720p (1280 × 720); D1 (704 × 576/704 × 480); VGA (640 × 480); CIF (352 × 288/352 × 240) Bit Rate Control CBR/VBR Video Bit Rate H.264: 3 kbps – 8192 kbps, H.265: 3 kbps – 8192 kbps Day/Night Auto(ICR)/Color/B/W BLC Supported HLC Supported Wide Dynamic Range (WDR) 120 dB Scene Self-Adaption (SSA) Supported White Balance Auto/natural/street lamp/outdoor/manual/regional custom Gain Control Auto/Manual Noise Reduction 3D DNR Motion Detection Off/On (4 areas, rectangular) Smart Motion Detection Human/Vehicle IVS Tripwire/Intrusion Region of Interest (ROI) Supported (4 areas) Smart Illumination Supported Image Rotation 0°/90°/180°/270° (Support 90°/270° with 1080p resolution and lower.) Mirror Supported Privacy Masking Up to 4 Areas Audio Compression G.711a; G.711Mu; PCM; G.726 (Only - ZAS supports) Network Ethernet RJ-45 (10/100 Base-T) Protocol IPv4, IPv6, HTTP, TCP, UDP, RTSP, TCP, RTMP, SMTP, FTP, DHCP, DDNS, UPnP, NTP Interoperability CGI;P2P;Milestone; Genetec Max. User Access 20 Users (Total Bandwidth: 64MB) Storage FTP, MicroSD Card (Up to 256GB), NAS Amcrest Surveillance Pro, Amcrest View Pro (iOS/Android), Amcrest Management Software Cloud, Amcrest Blue Iris, most mainstream web browsers including Google Chrome, Mozilla Firefox, Microsoft Edge, Safari, etc. Port Audio Input 1 Channel (RCA port) (Only-ZAS supports) Audio Output 1 Channel (RCA port) (Only-ZAS supports) Alarm Input 1 channel in: 5 mA 3–5 VDC (Only - ZAS supports) Alarm Output 1 channel out: 300 mA 12 VDC (Only - ZAS supports) General Power Supply 12V DC/PoE (802.3af) -ZS: Basic: 2.7 W (12 VDC); 3.6 W (PoE); Max. (H.265+ max. resolution Power Consumption + max. stream+ WDR + IR intensity + IVS): 8.3 W (12 VDC); 9.6W(PoE) Operating Conditions –22°F to +140 °F (-30°C to +60°C) Operating Humidity ≤95% Storage Conditions -40°F to 140°F (-40°C to 60°C) Ingress Protection IP67; IK10 Material Metal Junction Boxes: AMCPFA130-E Mounting Brackets Pole Mount: AMCPFA152-E Dimensions (L x W x H) 9.39" × 3.57" × 3.57" (238.5mm x 90.7mm x 90.7mm) Net Weight 1.63 lbs. Dimensions |
|
Surveillance Deployment & Architectural Overview
The Amcrest Ip8M Vb2696Ew Ai represents a dedicated node within modern security frameworks. Specialized for Bullet deployment, this camera integrates a high-definition video sensor imaging engine designed to capture high-density video data under variable lighting profiles. Equipped with a Standard surveillance optics configuration, the physical optical assembly yields optimized depth of field calculations suited for both residential perimeter surveillance and strategic commercial placements.
Streaming parameters are architected around high-efficiency codecs. The main stream operates up to a maximum framerate of 20 FPS, supplying dense frame arrays for primary analytical recording. The sub-stream runs at 30 FPS to deliver highly responsive live viewing across network clients without triggering performance bottlenecks. High-fidelity audio capabilities are Check manufacturer manual for hardware options, enabling synchronous monitoring of surrounding acoustic environments.
OpticLink Pro Deployment & Smart Home Integration
OpticLink Pro Connection
OpticLink Pro is the native, premium Windows multi-camera management application designed for seamless connection to the Amcrest Ip8M Vb2696Ew Ai. It leverages low-overhead hardware acceleration and memory-efficient streaming routines to handle high-resolution inputs without CPU bottlenecking. Simply copy the generated connection string below directly into the OpticLink Pro interface to establish instant, privacy-first surveillance feeds and synchronous recording.
Home Automation & Advanced Streaming
Maximize the full potential of your Amcrest Ip8M Vb2696Ew Ai hardware. OpticLink Pro natively integrates with the camera's high-fidelity audio streams and provides advanced RTSP controls. Additionally, this connection is fully compatible with home automation servers such as Home Assistant, enabling you to build responsive live-view dashboard blocks, trigger smart sensory scenes, and control smart remote modules like QuickRemote for Roku.
Hardware Diagnostics & LED Troubleshooting Status
Refer to the following structured troubleshooting framework to resolve connection dropouts, network handshake errors, or boot failures on the Amcrest hardware.
| LED Status Code | Operational Phase | Diagnostic / Resolving Action |
|---|---|---|
| Solid Red / Solid Amber | Booting / System Initialization | Hardware powering up. If this status persists for more than 180 seconds, verify stable current output on your PoE switch or local DC adapter. Perform physical power cycle or hard reset. |
| Flashing Amber / Orange | No Network / IP Address Pending | Network cable detected but DHCP handshake failed. Confirm physical connection to active switchport. Inspect DHCP server logs for MAC address registration anomalies. |
| Flashing Blue / Green | Wi-Fi Connecting / Local Handshake | Camera attempting local network authentication. Ensure the target SSID broadcast is active on the 2.4GHz band (or 5GHz where supported) and WPA/WPA2 password parameters are correct. |
| Solid Blue / Solid Green | Normal Active Operation | Authentication verified, active IP address leased, RTSP listener ready. Safe to initiate integration strings. |
Written by Christopher Istvan
Developer of OpticLink ProChristopher Istvan is a security technology writer and the Developer of OpticLink Pro. Specializing in high-fidelity RTSP video routing, surveillance networking protocols, and smart home automation architectures, Christopher compiles granular, clinical documentation directly from physical hardware teardowns and manufacturers' low-level datasheets.
Data Integrity & Liability
Disclaimer: The content on this page has been sourced from the manufacturers directly via automated crawling and technical datasheet parsing. While OpticLink strives for absolute accuracy, we are not liable for any faults, inaccuracies, or changes in technical specifications, firmware capabilities, or connection string data obtained from other publicly accessible or community-based sources. Always verify critical performance requirements with the manufacturer's official documentation prior to deployment.