Stream Performance
Connection Strings
rtsp:///cam/realmonitor?channel=1&subtype=00&authbasic=[AUTH]
rtsp:///
Documentation
OpticLink Index
This technical specification sheet was generated by the OpticLink resources & technical index. We specialize in aggregating high-fidelity camera data for professional integration.
Technical Specifications
Raw Datasheet ExtractIP8M-VD2893EW-AI Amcrest 8MP Veri-focal AI PoE Dome Network Camera Technical Specifications Model IP8M-VD2893EW-AI Camera Image Sensor 1/2.8”8Megapixel progressive CMOS Effective Pixels 3840 (H) × 2160 (V) RAM 128MB ROM 512 MB Scanning System Progressive Electronic Shutter Speed Auto/Manual 1/3 s–1/100,000 s 0.007 [email protected] (Color, 30IRE), 0.0007 [email protected] (B/W, 30IRE), 0 Lux Minimum Illumination (Illuminator on) IVS Tripwire, Intrusion (Vehicle/Human Detection). S/N Ratio >56dB IR Distance 131.2ft (40m) IR On/Off Control Auto/Manual IR LEDs 2 Manual Pan/Tilt/Rotation Range Pan: 0°-355°, Tilt: 0°-90°, Rotation: 0°-355° Lens Lens Type Motorized Vari-focal Mount Type φ14 Focal Length 2.7mm-13.5mm Max. Aperture F1.5 Angle of View H: 113°-31°, V: 58°-17°, 138°-36° Iris Type Fixed Close Focus Distance 2.62ft – 2.62ft (0.8m – 0.8m) Lens Detect Observe Recognize Identify W 279.9ft 111.9ft 55.8ft 27.9ft T 918.6ft 367.5ft 183.7ft 91.9ft Dori Distance Note: The DORI distance calculated based on sensor specification and lab test result 62676-4 which defines the criteria for Detect, Observe, Recognize, and Identify. Video Compression H.265/H.264 Main Stream: 3840 x 2160(1fps – 30fps), 2688 x 1520(1fps- Video Frame Rate 25/30fps) Sub Stream: 704 x 576 (1fps-25fps), 704 x 480 (1fps-30fps) Stream Capability 2 Streams 3840 × 2160 (3840 × 2160); 3072 × 2048 (3072 × 2048); 3072 ×1728 (3072 × 1728); 2592 × 1944 (2592 × 1944); 2688 × 1520 Resolution (2688 × 1520); 3M (2048 × 1536); 2304 × 1296 (2304 × 1296); 1080p (1920 × 1080); 1.3M (1280 × 960); 720p (1280 × 720); D1 (704 × 576/704 × 480); VGA (640 × 480); CIF (352 × 288/352 × 240) Bit Rate Control CBR/VBR Video Bit Rate H.264: 3 kbps–8192 kbpsH.265: 3 kbps–8192 kbps Day/Night Auto(ICR)/Color/B/W BLC/HLC Supported Wide Dynamic Range 120 dB White Balance Auto/natural/street lamp/outdoor/manual/regional custom Gain Control Auto/Manual Noise Reduction 3D NR Motion Detection OFF/ON (4 areas, rectangular) Region of Interest (ROI) Supported (4 areas) Smart Illumination Supported 0°/90°/180°/270° (Supports 90°/270° with 2688×1520 resolution Image Rotation and lower.) Mirror Supported Privacy Masking Up to 4 areas Alarm No SD card; SD card full; SD card error; network disconnection; IP Alarm Event conflict; motion detection; video tampering; tripwire; intrusion; illegal access; voltage detection; safety exception Network Network RJ-45 (10/100 Base-T) Video encryption; firmware encryption; configuration encryption; Cyber Security Digest; WSSE; account lockout; security logs; IP/MAC filtering; generation and importing of X.509 certification; syslog; HTTPS; 802.1x; trusted boot; trusted execution; trusted upgrade IPv4; IPv6; HTTP; TCP; UDP; ARP; RTP ; RTSP; RTCP; RTMP; SMTP; Protocol FTP; SFTP; DHCP; DNS; DDNS, UPnP Interoperability ONVIF (Profile S/Profile G/Profile T); CGI; P2P; Milestone; Genetec User/Host 20 (Total bandwidth: 72M) Storage FTP; Micro SD card (support max. 256 G); NAS General Power Supply 12V DC/PoE (802.3af) Basic power consumption: 2.7W (12V DC); 3.3W (PoE) Power Consumption Max. power consumption (WDR + H.265 + IR LED intensity): 6.8W (12V DC); 8.2W (PoE) Operating Conditions –22°F to +140°F (-30°C to +60°C) Storage Temperature –40°F to +140°F (–40°C to +60°C) Protection IP67 Casing Metal Dimensions (L x W x H) 3.5" × Φ4.8” (88.9 mm × Φ122 mm) Net Weight 1.10 lbs. Gross Weight 1.50 lbs. Dimensions |
Surveillance Deployment & Architectural Overview
The Amcrest Ip8M Vd2893Ew Ai represents a dedicated node within modern security frameworks. Specialized for Dome deployment, this camera integrates a high-definition video sensor imaging engine designed to capture high-density video data under variable lighting profiles. Equipped with a Standard surveillance optics configuration, the physical optical assembly yields optimized depth of field calculations suited for both residential perimeter surveillance and strategic commercial placements.
Streaming parameters are architected around high-efficiency codecs. The main stream operates up to a maximum framerate of 15 FPS, supplying dense frame arrays for primary analytical recording. The sub-stream runs at 30 FPS to deliver highly responsive live viewing across network clients without triggering performance bottlenecks. High-fidelity audio capabilities are Check manufacturer manual for hardware options, enabling synchronous monitoring of surrounding acoustic environments.
OpticLink Pro Deployment & Smart Home Integration
OpticLink Pro Connection
OpticLink Pro is the native, premium Windows multi-camera management application designed for seamless connection to the Amcrest Ip8M Vd2893Ew Ai. It leverages low-overhead hardware acceleration and memory-efficient streaming routines to handle high-resolution inputs without CPU bottlenecking. Simply copy the generated connection string below directly into the OpticLink Pro interface to establish instant, privacy-first surveillance feeds and synchronous recording.
Home Automation & Advanced Streaming
Maximize the full potential of your Amcrest Ip8M Vd2893Ew Ai hardware. OpticLink Pro natively integrates with the camera's high-fidelity audio streams and provides advanced RTSP controls. Additionally, this connection is fully compatible with home automation servers such as Home Assistant, enabling you to build responsive live-view dashboard blocks, trigger smart sensory scenes, and control smart remote modules like QuickRemote for Roku.
Hardware Diagnostics & LED Troubleshooting Status
Refer to the following structured troubleshooting framework to resolve connection dropouts, network handshake errors, or boot failures on the Amcrest hardware.
| LED Status Code | Operational Phase | Diagnostic / Resolving Action |
|---|---|---|
| Solid Red / Solid Amber | Booting / System Initialization | Hardware powering up. If this status persists for more than 180 seconds, verify stable current output on your PoE switch or local DC adapter. Perform physical power cycle or hard reset. |
| Flashing Amber / Orange | No Network / IP Address Pending | Network cable detected but DHCP handshake failed. Confirm physical connection to active switchport. Inspect DHCP server logs for MAC address registration anomalies. |
| Flashing Blue / Green | Wi-Fi Connecting / Local Handshake | Camera attempting local network authentication. Ensure the target SSID broadcast is active on the 2.4GHz band (or 5GHz where supported) and WPA/WPA2 password parameters are correct. |
| Solid Blue / Solid Green | Normal Active Operation | Authentication verified, active IP address leased, RTSP listener ready. Safe to initiate integration strings. |
Written by Christopher Istvan
Developer of OpticLink ProChristopher Istvan is a security technology writer and the Developer of OpticLink Pro. Specializing in high-fidelity RTSP video routing, surveillance networking protocols, and smart home automation architectures, Christopher compiles granular, clinical documentation directly from physical hardware teardowns and manufacturers' low-level datasheets.
Data Integrity & Liability
Disclaimer: The content on this page has been sourced from the manufacturers directly via automated crawling and technical datasheet parsing. While OpticLink strives for absolute accuracy, we are not liable for any faults, inaccuracies, or changes in technical specifications, firmware capabilities, or connection string data obtained from other publicly accessible or community-based sources. Always verify critical performance requirements with the manufacturer's official documentation prior to deployment.