Eufy RTSP Setup Guide
Enable local RTSP feeds on supported Eufy Security indoor cameras and sync them with NAS or third-party recorders.
Interactive Connection Generator
Fill in your camera credentials and local IP address below to immediately construct your ready-to-use stream paths.
Step-by-Step Local Configuration
Open Eufy Security Settings
Launch the Eufy Security app, tap the three dots (...) on your camera card, and select the Gear icon (Settings).
Go to NAS RTSP Streaming
Select General → Storage → NAS (RTSP) or search for RTSP Stream in Advanced Settings.
Enable RTSP and Save Credentials
Toggle RTSP ON. The app will automatically generate a custom stream URL containing secure credentials.
Check IP Connectivity
Ensure your phone/viewer and the Eufy camera are connected to the same Wi-Fi router. Note the IP address displayed on the screen.
Frequently Asked Questions
Q: Can I connect Eufy RTSP to Synology Surveillance Station?
Yes! Eufy's built-in NAS utility is specifically designed to output standard streams fully compatible with Synology, QNAP, and generic ONVIF-style network recorders.
Tested Models
The following models have been verified to support standard local RTSP streams natively:
Quick Optimization Tips
- •Eufy battery-powered outdoor cameras do not support continuous RTSP streaming to avoid depleting the battery.
- •When RTSP is enabled, the stream is limited to 1080p resolution to comply with local hardware encoding bounds.
- •If the camera loses power, RTSP settings will persist and auto-start upon boot.